The IC-F3002 is a VHF analogue radio from Icom. Meeting IP54 standards the F3002 has a limited ingress protection of dust, whilst also being protected against splashes of water. Ideal for a wide range of business and industry sectors, this radio is a simple but dependable communication solution. The IC-F3002 is supplied with both a Li-Ion battery and rapid charger as standard.
An internal VOX function is present on the IC-F3002, should handsfree communication be needed with this radio then it is a possibility via the use of an optional headset and adapter cable. Lone Worker function is also an option, this notifies other radios within a fleet when a radio has been inactive for a pre-set period of time, this helping to minimize damage should someone be in danger.
Added CTCSS, DTCS high speed decoder is present to reduce decode speed, whilst also having priority scan allowing you to monitor one or two priority channels whilst also scanning other non-priority channels. A TX channel and talk back function allows for quick response to messages whilst the IC-F3002 is still scanning.
Lone Worker Feature
Lone Worker is a feature found on many two way radios where it's able to send a pre-determined signal, for example a distress call or alarm, to other radios in range, Lone Worker requires some type of interaction from the radio user after a period of radio inactivity. An example of this is the radio can be set to require the radio operator to interact with his or her radio once every 30 minutes. If they fail to do so, their radio will start making an audible sound. If there is still no interaction with his or her radio within 1 further minute, a alarm will sound to other team members to tell them a team member is not responding to Lone Worker. The supervisor can then dispatch another team member to the non-reponsive team member's last known location to offer assistance.
Lone Worker is a software upgrade to the Icom IC-F3002.
Digital Basic Privacy
Basic Privacy uses a fixed "key" which is set when the radio is programmed, of which there are 255 possible "keys". Whilst this level of privacy is technically basic encryption, it's nevertheless relatively insecure. Comparable to analogue 'inversion' scrambling, it will prevent the 'casual' listener from hearing anything, but does not guarantee against eavesdropping.
Basic Digital Privacy is built-in to the Icom IC-F3002
Channel scanning enables the user to monitor a number of channels and respond when a transmission comes through. The scan feature can usually be programmed to include or exclude channels from the scan. Scanning fewer channels makes the scan faster.
A common example is when there is a private channel and community channel programmed. This is usually the case for a shop which is a member of the local business crime reduction (or shop-watch / pub-watch) scheme. The radio would "scan", or alternate between, both channels. Normally, they might only use channel 1 for their own private use within the organisation. But when a transmission (or call) comes through on the local business crime reduction (or shop-watch) scheme channel becomes active. Then within a few seconds the radio would revert back to it's original channel 1.
Digital hybrid radios can usually scan either or both digital and analogue channels simultaneously. This allows for an extremely flexible scan facility where the user can monitor many channels across both analogue and digital modes.
Channel Scanning is built-in to the Icom IC-F3002
Voice Activation (VOX)
Voice activation, commonly refered to as VOX, allows the user to initiate the radio to transmit, simply by using their voice. Some radios only allow VOX capability via an external audio accessory such as an earpiece or headset which is VOX-enabled or has a VOX button.
Activating Voice Activation or VOX
There are two possible ways of enabling voice activation (VOX). The first is that we can program a VOX-enable / VOX disable button on the radio. The other option is that we supply an audio accessory, an earpiece or headset, that has a VOX button. Contact us for more information about this.
Programming May Be Required
There may be programming required to activate VOX on your radio. In any event, please talk to our knowledgeable staff and we will be able to offer advice on VOX activation.
Voice Activation (VOX) is built-in to the Icom IC-F3002, but a VOX-enabled audio accessory, such as an earpiece or headset, may be required.