We are a fully authorised worldwide dealer of Kenwood radio products. All products are supplied with a full warranty. Ensure your purchases are supplied by am authorised dealer. All products are supplied from the UK, and shipped registered and insured courier.
The NX-300E4 is a UHF Digital two way radio from Kenwood. Built to military standards (MIL-STD-810) the NX-300E4 has been tested in some of the toughest working environments, rugged and reliable the radio will continue to work in adverse conditions. IP67 protection means that not only does the NX-300E4 have a limited ingress protection against dust, but can also be immersed in water up to 1 meter deep for 30 minutes.
An Internal VOX function is pre-programmed into the NX-300E4, this allows for hands free communication with the radio should it be needed in specific working environments. 8 Programmable keys are also present on the body of the NX-300E4, this allows for customization of the radio to fit the purpose of the users work. Lone Worker is also readily available on the radio, this is a program that will monitor the activity levels of the NX-300E4, should the radio be inactive for a pre-set period of time then an alert will be sent to other radios within the network, ideal for dangerous working environments.
With the ability to operate in both NXDN Digital Conventional and FM Analogue modes, these can both be encompassed via the same channel. The NX-300E4 has 512 selectable channels, meaning that even for a larger scale operation the radio will continue to be sufficient. Present on the front of the radio you will find a 14 character alphanumeric LCD display, along side a partial key pad for basic functioning.
Digital Basic Privacy
Basic Privacy uses a fixed "key" which is set when the radio is programmed, of which there are 255 possible "keys". Whilst this level of privacy is technically basic encryption, it's nevertheless relatively insecure. Comparable to analogue 'inversion' scrambling, it will prevent the 'casual' listener from hearing anything, but does not guarantee against eavesdropping.
Basic Digital Privacy is built-in to the Kenwood NX-300E4.
Voice Activation (VOX)
Voice activation, commonly refered to as VOX, allows the user to initiate the radio to transmit, simply by using their voice. Some radios only allow VOX capability via an external audio accessory such as an earpiece or headset which is VOX-enabled or has a VOX button.
Activating Voice Activation or VOX
There are two possible ways of enabling voice activation (VOX). The first is that we can program a VOX-enable / VOX disable button on the radio. The other option is that we supply an audio accessory, an earpiece or headset, that has a VOX button. Contact us for more information about this.
Programming May Be Required
There may be programming required to activate VOX on your radio. In any event, please talk to our knowledgeable staff and we will be able to offer advice on VOX activation.
VOX Voice Activation is built-in to the Kenwood NX-300E4.
Channel scanning enables the user to monitor a number of channels and respond when a transmission comes through. The scan feature can usually be programmed to include or exclude channels from the scan. Scanning fewer channels makes the scan faster.
A common example is when there is a private channel and community channel programmed. This is usually the case for a shop which is a member of the local business crime reduction (or shop-watch / pub-watch) scheme. The radio would "scan", or alternate between, both channels. Normally, they might only use channel 1 for their own private use within the organisation. But when a transmission (or call) comes through on the local business crime reduction (or shop-watch) scheme channel becomes active. Then within a few seconds the radio would revert back to it's original channel 1.
Digital hybrid radios can usually scan either or both digital and analogue channels simultaneously. This allows for an extremely flexible scan facility where the user can monitor many channels across both analogue and digital modes.
Channel Scanning is built-in to the Kenwood NX-300E4.
Lone Worker Feature
Lone Worker is a feature found on many two way radios where it's able to send a pre-determined signal, for example a distress call or alarm, to other radios in range, Lone Worker requires some type of interaction from the radio user after a period of radio inactivity. An example of this is the radio can be set to require the radio operator to interact with his or her radio once every 30 minutes. If they fail to do so, their radio will start making an audible sound. If there is still no interaction with his or her radio within 1 further minute, a alarm will sound to other team members to tell them a team member is not responding to Lone Worker. The supervisor can then dispatch another team member to the non-reponsive team member's last known location to offer assistance.
Lone Worker is built-in to the Kenwood NX-300E4.
Ofcom Licence Options
All licensed radios require a licence issued by Ofcom. Radiotronics can facilitate that and make the application on your behalf. Below are the licence options.
|Ofcom Licence Options|
|Security / Construction
||Hospitality / Bars etc.
|£75 for 5 years
||£75 for 5 years
||£75 for 5 years
|3 shared assigned channels that can be used anywhere in the UK. Any of our handheld two way radios can be programmed to SImple UK.
||Up to 15 shared channels that can only be used at your premises. Any of our handheld two way radios can be programmed to SImple Site.
||Up to 15 shared channels that can be used for rental companies anywhere in the UK.
||Unique channels technically assigned only to you. Used for repeater based systems.
A note on licensed frequencies. The Ofcom licence you hold or buy denotes the frequency your radios will operate on. If you already have some radios and you would like your new radios programmed the work together, please select technically assigned, and email us your ofcom licence details to firstname.lastname@example.org
. If in doubt, please call us on 01425 533 533.