Hytera PD795-Ex is an ATEX approved digital to way radio from Hytera. The PD795-Ex has a high resolution LCD display and full keypad allowing DTMF telephone calls directly from the radio (via repeater). On this page you will find a comprehensive description of the Hytera PD795Ex and a full list of it's features.
The PD795Ex is the display & keypad version. If you do not need the LCD display and keypad, see the Hytera PD715ex which is almost the same radio with no keypad or display for ease of use.
Hytera PD795-Ex Description
The 1024 channel capacity allows you to have hundreds of channels and configurations in just one radio. In analogue mode you can select 12.5, 20 or 25 channel spacing meaning it can work with any analogue system. Mixed mode scanning is a great feature that allows you to scan both analogue and digital programmed channels. The PD795Ex is ingress-resistant and IP67 compliant, meaning the radio can be submersed in up to 1m of water for up to 30 minutes without causing any damage. ATEX approved to Ex ib IIC T4 (Ex ib D21 T4 IP6X) standards and is ideal for use in dangerous areas.
The Hytera PD795Ex has GPS factory-installed. That means, with the help of Hytera Smart Dispatch control room dispatch software, keep track of your radios and your staff. GPS enables the user to get help faster if the user is stranded. As long as the radio is in range, the dispatcher or supervisor can see the location of the radio and the team member.
The PPD795Ex has built-in voice call function and text messaging. This allows the use to send text messages, free type of stored messages, to fellow team members. It also supports remote enable/disable, remote monitor and call alert.
Security functions that the PD795Ex supports are basic and AES encryption (upgrade fee) in digital mode, and traditional scrambler in analogue mode.
Hytera PD795Ex Features
- Up to 1024 channels
- 12.5/20/25 selectable channel spacing
- Mixed mode scanning (Analogue & Digital channel)
- IP67 and MIL-STD-810G to ensure outstanding performance in harsh
- ATEX: II 2G Ex ib IIC T4 (Gas); II 2D Ex ib IIIC T120°C IP5X (Dust); I M2 Ex ib (mining)
- F M: Class I, Zone 1 AEX/Ex ib IIC T4 ; Class II, III Div1, Group E, F, G T120°C ;
- -20°C<= Ta<=50°C
- Supporting Global Positioning System (GPS) (standard)
- Digital voice call function
- Digital text message function (pre-programmable message)
- Remote monitor, radio enable, radio disable, call alert)
- Man-down (standard)
- Lone worker
- Basic Scrambler and Encryption
- Advanced Encryption (128/256bit) (option)
- Pseudo trunk operation (DMO & RMO)
- Multi-Site Roaming (optional)
- Channel Change Voice Notifi cation
- 5 tone , HDC1200, 2 tone signalling selectable ( in analogue mode)
- One touch call/text message
- Analogue & Digital Emergency
- MPT1327 & DMR Tier III compatible
- Supports XPT digital Trunking
Two Way Radio GPS
GPS (global positioning system) is a mechanism which a device can use a number of in-range satellites to trangulate it's position and transmit that position back to the repeater or base station. This enables the supervisor to more effectively manage team members by knowing their current location.
GPS Demonstration Video
download this Motorola GPS information sheet.
For more information on GPS,
GPS is designed for outdoor tracking. See "Indoor tracking" for indoor solutions.
GPS outdoor tracking is a standard feature of the Hytera PD795Ex.
TDMA is a technology that allows several users to share the same frequency channel by dividing the signal into different time slots. With DMR this is two time slots to every 12.5KHz frequency channel allocation. Before DMR every 12.5KHz frequency allocation could carry just one broadcast of RF traffic. Now with DMR 12.5KHz bandwidth allows two voice channels. See the video below for an explanation on how this works.
Hytera have a unique system called Psudo Trunk that, instead of restricting radios to their allocated DMR time slot, allows a radio to choose any available time slot to make a call. This enables trunking-like behaviour across both DMR time slots. This also allows transmit interrupt accross multiple voice channels / talk groups.
Psudo-Trunking works with or without a repeater.
Transmit interrupt is a feature that enables a high priority transmission to take priority over normal priority transmissions. For example a supervisor might want to make an important announcement to the team or call for an evacuation in the event of a incident.
Transmit Interrupt Information Video
Transmit Interrupt is a standard feature of the Hytera PD795Ex.
MPT1327 is an analogue trunking soution that makes use of multiple repeaters and creates "channel pools". How it works is that when a radio needs to make a call (or transmission) the MPT1327 controller allocates a free repeater channel to the radio. When the call ends, th e channel is allocated back to the available channel pool. The MPT1327 solution is now deprecated in favour of more modern digital solutions such as DMR or dPMR Tier II and Tier III.
There are stil a very many MPT1327 solutions still installed and that's why some new radios have the ability to operate on an MPT1327 system. Of course when operating on MPT1327, even a digital radio will have to operate in analogue mode as MPT1327 voice traffic is analogue. Usually MPT1327 functionality is an optional extra by way of having an MPT1327 option board fitted in the radio, or a software activation.
Hytera PD795Ex has MPT1327 built in and is available free of charge.
Lone Worker Feature
Lone Worker is a feature found on many two way radios where it's able to send a pre-determined signal, for example a distress call or alarm, to other radios in range, Lone Worker requires some type of interaction from the radio user after a period of radio inactivity. An example of this is the radio can be set to require the radio operator to interact with his or her radio once every 30 minutes. If they fail to do so, their radio will start making an audible sound. If there is still no interaction with his or her radio within 1 further minute, a alarm will sound to other team members to tell them a team member is not responding to Lone Worker. The supervisor can then dispatch another team member to the non-reponsive team member's last known location to offer assistance.
Lone Worker is built-in to the Hytera PD795Ex.
Man Down provides remote monitoring of workers by detecting if their radio is upright, or if the radio is on it's side assumes there may be a problem. Radios which support Man Down are fitted with an accelerometer (or similar device) which allows them to detect the orientation of the radio. If somebody slips or falls, they are likely to be on their side, Man Down will automatically detect this, activate and transmit an alert to call for help from a supervisor or other team members. This works is almost the same way as your smart phone which knows if you have it positioned portrait mode or landscape mode. See this video below to see how the a works.
Man Down Demonstration Video
The Accelerometer Science
The science which allows man-down to work is almost the same way as your smart phone which knows if you have it positioned portrait mode or landscape mode. See this video below to see how the a works.
Man Down is built-in to the Hytera PD795Ex.
Hytera PD795Ex Function Diagram
Diagram of the Hytera PD795-Ex buttons and functions.
Hytera PD795Ex Function Table
||Side Key 1
||Side Key 2
||TK (Top Key)
Hytera PD795Ex Full Keypad
The Hytera PD795Ex has a complete keypad enabling full DTMF telephone calls (via repeater).
Hytera PD795Ex IP67
The Hytera PD795Ex is fully waterproof to IP67 compliance.
Hytera PD795Ex Top Buttons
Volume & Channel select on top panel.
Hytera PD795Ex Screen
High definition, very clear, display.
Hytera PD795Ex ATEX Battery
ATEX rated battery with patented battery latch.
Hytera PD795Ex Red Button
Emergency Button on top panel.
Hytera Warranty & Extension Options
All Hytera two way radios carry a 24 month return to base (RTB) warranty. Hytera will guarantee you a working radio by offering a repair for a period of two years from the purchase invoice date. The warranty only covers the radio itself and does not cover the battery, antenna or any other consumables or accessories.
warranty policy and DOA (dead on arrival) policy.
Please read the Hytera
||Extended Warranty Options
|Period of Cover
||2 Years RTB
||3 Years RTB
||4 Years RTB
||5 Years RTB
|Manufacturer Defects Only
|Covers Normal Wear & Tear
|Covers Accidental Damage
||No More than 20 working days*
10am - 4pm, Mon-Fri
10am - 4pm, Mon-Fri
Warranty offered is a manufacturer's warranty and is directly with Hytera. However, all warranty claims must be made via Radotronics.
Note: Return to Base (RTB) means that you are responsible for the postage cost to Hytera for a warranty claim. However, Hytera will return the item to you or your dealer free of charge. * Does not include shipping time.
Ofcom Licence Options
All licensed radios require a licence issued by Ofcom. Radiotronics can facilitate that and make the application on your behalf. Below are the licence options.
|Ofcom Licence Options|
|Security / Construction
||Hospitality / Bars etc.
|£75 for 5 years
||£75 for 5 years
||£75 for 5 years
|3 shared assigned channels that can be used anywhere in the UK. Any of our handheld two way radios can be programmed to SImple UK.
||Up to 15 shared channels that can only be used at your premises. Any of our handheld two way radios can be programmed to SImple Site.
||Up to 15 shared channels that can be used for rental companies anywhere in the UK.
||Unique channels technically assigned only to you. Used for repeater based systems.
A note on licensed frequencies. The Ofcom licence you hold or buy denotes the frequency your radios will operate on. If you already have some radios and you would like your new radios programmed the work together, please select technically assigned, and email us your ofcom licence details to firstname.lastname@example.org
. If in doubt, please call us on 0345 0 955 955.