The VX-261 is an analogue two way radio from Motorola. Built to IP55 standards the radio has a limited Ingres protection against dust, whilst also being safeguarded against jets of water from all angles. Available for both UHF and VHF frequencies, the VX-261 has a 16 channel capacity allowing for sufficient use by small to medium sized businesses. Meeting military standards (MIL-STD-810 C/D/E/F/G) means that the VX-261 is a rugged and reliable, tested in harsher working environments to ensure its durability.
Various safety features readily installed onto the VX-261 ensure the safety of users. Lone Worker signals should a radio be inactive for a pre-set period of time, a noise will be played from the users radio and if this isn’t responded to an alert will be sent out to all other operatives in the group. VOX Voice Activation allows for the radio to be used hands free, ideal for a variety of working environments this will allow the user to continue working whilst communicating.
2 Programmable keys allow for the customization of the radio to the users needs. Multiple signalling types in CTCSS and DCS are available for use, whilst the radio also has multiple scanning options. The VX-261 comes as standard with a 1380mAh Li-Ion battery, this will allow for up to 11 hours of talk time, a battery and antenna is also supplied as standard with the VX-261 whilst a charger is an additional extra.
FREE Radio ID Labels Supplied & Applied
For no extra cost, we supply labels with all of our radios.
Our labels are unique in that they have a space where you can write on them with a sharpie-type permanent marker. You can either use this space to write a radio number or apply a dymo label for example. These labels ate 100% free of charge
Don't Want FREE Radio ID Labels?
Note: If you would prefer that we did not apply these labels to your radios, you must tell us when ordering as they are non-removable.
Lone Worker Feature
Lone Worker is a feature found on many two way radios where it's able to send a pre-determined signal, for example a distress call or alarm, to other radios in range, Lone Worker requires some type of interaction from the radio user after a period of radio inactivity. An example of this is the radio can be set to require the radio operator to interact with his or her radio once every 30 minutes. If they fail to do so, their radio will start making an audible sound. If there is still no interaction with his or her radio within 1 further minute, a alarm will sound to other team members to tell them a team member is not responding to Lone Worker. The supervisor can then dispatch another team member to the non-reponsive team member's last known location to offer assistance.
Lone Worker is built-in to the Motorola VX-261.
Channel scanning enables the user to monitor a number of channels and respond when a transmission comes through. The scan feature can usually be programmed to include or exclude channels from the scan. Scanning fewer channels makes the scan faster.
A common example is when there is a private channel and community channel programmed. This is usually the case for a shop which is a member of the local business crime reduction (or shop-watch / pub-watch) scheme. The radio would "scan", or alternate between, both channels. Normally, they might only use channel 1 for their own private use within the organisation. But when a transmission (or call) comes through on the local business crime reduction (or shop-watch) scheme channel becomes active. Then within a few seconds the radio would revert back to it's original channel 1.
Digital hybrid radios can usually scan either or both digital and analogue channels simultaneously. This allows for an extremely flexible scan facility where the user can monitor many channels across both analogue and digital modes.
Channel Scanning is built-in to the Motorola VX-261.
Voice Activation (VOX)
Voice activation, commonly refered to as VOX, allows the user to initiate the radio to transmit, simply by using their voice. Some radios only allow VOX capability via an external audio accessory such as an earpiece or headset which is VOX-enabled or has a VOX button.
Activating Voice Activation or VOX
There are two possible ways of enabling voice activation (VOX). The first is that we can program a VOX-enable / VOX disable button on the radio. The other option is that we supply an audio accessory, an earpiece or headset, that has a VOX button. Contact us for more information about this.
Programming May Be Required
There may be programming required to activate VOX on your radio. In any event, please talk to our knowledgeable staff and we will be able to offer advice on VOX activation.
Voice Activation (VOX) is built-in to the Motorola VX-261, but a VOX-enabled audio accessory, such as an earpiece or headset, may be required.
Ofcom Licence Options
All licensed radios require a licence issued by Ofcom. Radiotronics can facilitate that and make the application on your behalf. Below are the licence options.
|Ofcom Licence Options|
|Security / Construction
||Hospitality / Bars etc.
|£75 for 5 years
||£75 for 5 years
||£75 for 5 years
|3 shared assigned channels that can be used anywhere in the UK. Any of our handheld two way radios can be programmed to SImple UK.
||Up to 15 shared channels that can only be used at your premises. Any of our handheld two way radios can be programmed to SImple Site.
||Up to 15 shared channels that can be used for rental companies anywhere in the UK.
||Unique channels technically assigned only to you. Used for repeater based systems.
A note on licensed frequencies. The Ofcom licence you hold or buy denotes the frequency your radios will operate on. If you already have some radios and you would like your new radios programmed the work together, please select technically assigned, and email us your ofcom licence details to firstname.lastname@example.org
. If in doubt, please call us on 01425 533 533.