We are a fully authorised worldwide dealer of Kenwood radio products. All products are supplied with a full warranty. Ensure your purchases are supplied by am authorised dealer. All products are supplied from the UK, and shipped registered and insured courier.
The TK-3360 is a UHF analogue two way radio from Kenwood. Meeting IP55 requirements this radio has a limited ingress protection against dust, whilst also being safeguarded against jets of water from all angles. Operating to MIL-STD-810 (C/D/E/F) the TK-3360 has been tested in some of the harshest working environments, proven to continue working even in conditions such as blowing rain.
A 16 channel capacity offers ample storage with the TK-3360, also hosting a colour coded channel stopper in order to enhance operability when only a select few of the channels are required. Side mounted programmable keys are featured on the TK-3360, this allows for easier operation usage whilst also taking advantage of the hold feature in order to double the number of functions available for quick use.
The TK-3360 is supplied as standard with a KNB-55L 1800mAh Li-Ion battery, this will allow for up to 9 hours of talk time. Standing at 103.7mm tall, 56mm wide and 29.1mm in depth whilst the battery is connected, the TK-3360 is described as a slim, compact and lightweight radio. Advances in Kenwoods engineering have resulted in ergonomic designs that are easy to grip and operate in a variety of working environments.
The TK-3360 is UHF. If you would like the VHF version, please see the Kenwood TK-2360.
Digital Basic Privacy
Basic Privacy uses a fixed "key" which is set when the radio is programmed, of which there are 255 possible "keys". Whilst this level of privacy is technically basic encryption, it's nevertheless relatively insecure. Comparable to analogue 'inversion' scrambling, it will prevent the 'casual' listener from hearing anything, but does not guarantee against eavesdropping.
Basic Digital Privacy is built-in to the Kenwood TK-3360.
Voice Activation (VOX)
Voice activation, commonly refered to as VOX, allows the user to initiate the radio to transmit, simply by using their voice. Some radios only allow VOX capability via an external audio accessory such as an earpiece or headset which is VOX-enabled or has a VOX button.
Activating Voice Activation or VOX
There are two possible ways of enabling voice activation (VOX). The first is that we can program a VOX-enable / VOX disable button on the radio. The other option is that we supply an audio accessory, an earpiece or headset, that has a VOX button. Contact us for more information about this.
Programming May Be Required
There may be programming required to activate VOX on your radio. In any event, please talk to our knowledgeable staff and we will be able to offer advice on VOX activation.
VOX Voice Activation is built-in to the Kenwood TK-3360.
Channel scanning enables the user to monitor a number of channels and respond when a transmission comes through. The scan feature can usually be programmed to include or exclude channels from the scan. Scanning fewer channels makes the scan faster.
A common example is when there is a private channel and community channel programmed. This is usually the case for a shop which is a member of the local business crime reduction (or shop-watch / pub-watch) scheme. The radio would "scan", or alternate between, both channels. Normally, they might only use channel 1 for their own private use within the organisation. But when a transmission (or call) comes through on the local business crime reduction (or shop-watch) scheme channel becomes active. Then within a few seconds the radio would revert back to it's original channel 1.
Digital hybrid radios can usually scan either or both digital and analogue channels simultaneously. This allows for an extremely flexible scan facility where the user can monitor many channels across both analogue and digital modes.
Channel Scanning is built-in to the Kenwood TK-3360.
Lone Worker Feature
Lone Worker is a feature found on many two way radios where it's able to send a pre-determined signal, for example a distress call or alarm, to other radios in range, Lone Worker requires some type of interaction from the radio user after a period of radio inactivity. An example of this is the radio can be set to require the radio operator to interact with his or her radio once every 30 minutes. If they fail to do so, their radio will start making an audible sound. If there is still no interaction with his or her radio within 1 further minute, a alarm will sound to other team members to tell them a team member is not responding to Lone Worker. The supervisor can then dispatch another team member to the non-reponsive team member's last known location to offer assistance.
Lone Worker can be programed in to the Kenwood TK-3360.
Ofcom Licence Options
All licensed radios require a licence issued by Ofcom. Radiotronics can facilitate that and make the application on your behalf. Below are the licence options.
|Ofcom Licence Options|
|Security / Construction
||Hospitality / Bars etc.
|£75 for 5 years
||£75 for 5 years
||£75 for 5 years
|3 shared assigned channels that can be used anywhere in the UK. Any of our handheld two way radios can be programmed to SImple UK.
||Up to 15 shared channels that can only be used at your premises. Any of our handheld two way radios can be programmed to SImple Site.
||Up to 15 shared channels that can be used for rental companies anywhere in the UK.
||Unique channels technically assigned only to you. Used for repeater based systems.
A note on licensed frequencies. The Ofcom licence you hold or buy denotes the frequency your radios will operate on. If you already have some radios and you would like your new radios programmed the work together, please select technically assigned, and email us your ofcom licence details to email@example.com
. If in doubt, please call us on 01425 533 533.